-
- Ready to use
- Quick construction
- Excellent workability
- High bond formation
- Flexible/Self healing
- Minimal wastage
- Good Crack resistance
-
- Red Bricks
- Fly ash Bricks
- Solid Blocks
- AAC Blocks
-
Surfaces to receive Mortar Mix should be clean and free of dirt, loose debris, grease, oil, etc., for the best possible bond. Add 7-8 Litres of clean water into 50 kg of Renafix Cement Mortar mix in a container/bowl and mix well until reach to the workable condition. If required add additional water to reach required workability and consistency of wet mortar mix. Apply a full bed of mortar onto the base, approximately 1/2 inch to 3/4 inch (12 mm to 18 mm) thickness. Push downward into the mortar bed and sideways against the previously laid block with a slight twisting motion. Tool the mortar joints when they become thumbprint hard. This will make the mortar joint watertight and provide a neat appearance. Cure the wall with water into two times for 5 -7 days then allow for plastering
-
Available in 50kg Packing in Waterproof PP Liner Bags
-